Notebook drive replacement panel method
- Author:Candy
- Release on :2014-12-24
Notebook driveAfter a few years, some functionality will be aging, this time to buy a new drive to replace the old, but with no suitable baffles, then only remove the old drive bezel to install the new drive in the above in order to achieve the perfect replacement. For friends who are not good at DIY, do not know how to drive the panel removed and installed the following to introduce a relatively simple method of disassembly.
Demolition panel steps:
1. First, pull the drive tray
2. Insert the CD-ROM, in turn, see panel and drive tray place together with a screw with a screwdriver or other items to Top panel snaps forward, snaps came out.
3. CD-ROM drive and then, in turn, gently pull the panel came out.
Panel mounted the steps of:
1. Use a paper clip or sharp sharp slimline products into the front right-hand side of a circular hole, the tray pops out.
2. Pull out the tray, front snap buckle bit first panel alignment optical drive on the left, and click inside.
3. Then the middle and right inside the snaps in the order according to the panel's OK.
The method is very simple, right, after reading this, I believe we can easily replace the drive panel it ^ _ ^